KPL-P1

Throwing device mount

Features

  • High Stability Design
    • All-aluminum structure design, light and sturdy, good heat dissipation
    • Carbon fiber structure, large bearing capacity
    • ±0.01° image stabilization accuracy
  • High Performance
    • Up to three mount points
    • More than 10kg for every single throw weight
    • Accurate throwing
    • Convenient dismounting

Technical Specification

  KPL-P1
Image Sensor 1/2.8’’ Progressive Scan CMOS
Pixels 2.0 Megapixel
Min. Illumination Color: 0.001lux @ F1.6

B/W: 0.0001lux @ F1.6

Digital Noise Reduction 3D noise reduction
Digital Defog Supported
Shutter Speed 1 ~ 1/30,000S
Focal Length 8mm
Angle of View 48°
Min. Object Distance 40mm
Compression H.265 / H.264 / MJPEG
Image Resolution Main stream: 1080p

Secondary stream: D1

Frame Rate Main stream: 1080p@30fps

Secondary stream: D1@30fps

Storage Up to 128GB Micro SD card, 32GB by default
Max. load weight 10kg for each mount point
Mount point number 3
Release mode Individual by Remote control
Operating Temperature -20°C ~ 60°C / -4°F ~ 140°F
Operating Humidity 10% ~ 95%
Storage Temperature -20°C ~ 70°C / -4°F ~ 158°F
Power Consumption Max. 7W
Weight 0.6kg / 1.33lb
Dimensions 189 × 160 × 174mm  /  7.45″ x 6.30″ x 6.85″

Resource

Specification Document

KPL-P1 Specification Document